The machine achieves the world's highest sewing speed of 3,000rpm
In addition to the high-speed sewing performance, the machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time
The machine comes with a newly developed needle thread grasping mechanism
The mechanism prevents thread from slipping off from the needle eyelet at the beginning of sewing, from tangling on the wrong side of the material and also being stained during sewing
The thread trimming mechanism has been further improved to shorten the length of thread remaining on the wrong side of the material after thread trimming
With its 30mm (length) by 40mm (width) sewing area, the machine can sew many different shapes of bartacks
The machine is provided as standard with as many as 50 different types of sewing patterns including semilunar bartacking, round bartacking, radial tacking as well as conventional bartacks
Thanks to our advanced dry-head technology, the frame (needle bar and thread take-up) no longer requires lubrication. This prevents the material from being stained with lubricating oil
Just a small quantity of just clean oil is supplied from the oil tank to the hook
The machine is provided as standard with an auto-lifter that uses a new stepping-motor system. This helps reduce operator fatigue
It is also possible to change over the stroke of the auto-lifter from a one-step stroke to a double-step stroke, which offers easier positioning of a material on the machine
For the double-step stroke, an intermediate stopping height can be established on the operation panel
The presser foot lift can be set to a maximum of 17mm by using the reverse-rotation needle-up function in combination with the auto lifter mechanism
The direct-drive head (with no belt), which is directly connected to a compact AC servomotor, achieves outstanding responsiveness and improved stop accuracy
head helps create a comfortable working environment with reduced vibration and noise
The arm section of the machine head is fitted with a hand pulley. This allows the operator to visually check the needle entry points
